Renaming of CT-13-1000 to CT-14-1000

23. September 2014

Higher pressure ratio and larger work area: A design optimization of the turbo compressor CT-13-1000 has enabled great improvements.

Only a year ago, Celeroton introduced the CT-13-1000 as its first diagonal turbo compressor. The new product enabled massive savings with regards to size and weight for various applications (see newsletter article Product Launch CT-13-1000).

This compressor has recently been fluid dynamically optimized. This has led to two important improvements:

  • CT-14-1000The minimum requirement regarding mass flow, also known as surge line, has been reduced. This enables a larger work area with regards to flow rate/mass flow with the same compressor.
  • The maximum pressure ratio has been increased from 1.3 to 1.4, whereas the work area has been enlarged upwards. This has opened up new application areas such as providing the air supply for fuel cells.

The following chart shows how impressive the optimization has been in enlarging the work area:

In order to introduce the increased pressure ratio in the product name, we have renamed the compressor to CT-14-1000. You can find further information regarding the improved product in the data sheet.

We are glad to examine your potential new application areas using the improved CT-14-1000. Please contact us at infocelerotoncom or call us on +41 44 250 52 20.

< back


High-speed magnetic bearing chopper for infrared nanospectroscopy

Infrared (IR) nanospectroscopy is a non-destructive method for the analysis of molecular structures below the ...

> more

Design of ultra-high speed optical beam chopper rotors

High-speed beam choppers usually require a fast circumferential and rotational speed and vacuum operation, for which ...

> more