Auto Tuning

09. October 2012

Easy commissioning of motors and spindles

 

Auto Tuning

 

• Commissioning of motors and spindles within a minute?

• regular exchange of spindles using the same converter?

• test various modifications on the drive system?

• no motor-datasheet available?

• modify the test bench and directly continue working with it?

All this is possible with one click in our new, automated parameter detection routine available for Celeroton’s converter line. It is integrated in all new CC-75-500 and CC-75-400 devices as well as for previous versions with an appropriate update. Please get in touch with us via supportcelerotoncom for a firmware and software update if necessary.

< back

Tech-Blog

High-speed magnetic bearing chopper for infrared nanospectroscopy

Infrared (IR) nanospectroscopy is a non-destructive method for the analysis of molecular structures below the ...

> more

Design of ultra-high speed optical beam chopper rotors

High-speed beam choppers usually require a fast circumferential and rotational speed and vacuum operation, for which ...

> more

News

Demonstration of magnetic bearing chopper operation

The magnetic bearing motor CM-AMB-400 with a chopper rotor is demonstrated in the video below. A laser beam (generated ...

> more

Turbo compressors for operation at high-altitude

How nice it would be to drive a fuel cell vehicle through the mountains and over a pass emission-free and to enjoy the ...

> more