Auto Tuning

09. October 2012

Easy commissioning of motors and spindles

 

Auto Tuning

 

• Commissioning of motors and spindles within a minute?

• regular exchange of spindles using the same converter?

• test various modifications on the drive system?

• no motor-datasheet available?

• modify the test bench and directly continue working with it?

All this is possible with one click in our new, automated parameter detection routine available for Celeroton’s converter line. It is integrated in all new CC-75-500 and CC-75-400 devices as well as for previous versions with an appropriate update. Please get in touch with us via supportcelerotoncom for a firmware and software update if necessary.

< back

Tech-Blog

Development of an oil-free turbo compressor for mobile fuel cell applications – challenges and results

The compressor for supplying air to a fuel cell stack is a critical component in the balance of plant (BoP), especially ...

> more

Highest level of tightness, lowest leakage rates of turbocompressors with gas bearings for noble gas processing

Compressor applications frequently require a high demand for tightness performance of the turbo compressor. For many ...

> more

News

New CT-2X series

Celeroton presents the new CT-2X turbo compressor series with air bearings in order to meet the increased market demand ...

> more

Celebrating our 10-year anniversary

Fast, faster, Celeroton! A retrospect of the last ten years.

> more