Sensorless Control

26. September 2011

New: Sensorless speed control from standstill for synchronous motors

CC-75-500Celeroton has launched the newest version of its electronic converter CC-75-500. This is the world’s first converter that allows for sensorless control of permanent-magnet synchronous machines (PMSM) and brushless dc motors (BLDC) up to 1 million rpm – and this from standstill.

The integrated pulse-amplitude modulation (PAM) drives BLDC and PMSM, commonly used in dental- and medical tools and machining spindles, at higher rotational speeds with minimal losses in stator and rotor. Due to the sensorless speed control, Hall sensors can be completely omitted, even for speeds below 10 % of the nominal speed where standard converters would usually require a position feedback sensor. This results in a simplification in the motor design and less cables and connectors, with a resulting increase in reliability.

Celeroton’s technology allows for highly compact drive systems with highest maximal rotational speeds and full torque at low speeds in various applications. And all this without encoders or Hall sensors!

< back

Tech-Blog

Vibration testing of the CT-2X air-bearing turbo compressor for mobile fuel cell applications

Turbo compressors have to cope with the vibration and lifetime requirements when used in mobile fuel cell applications, ...

> more

Gas bearing design for non-air applications

The design of gas bearings for noble or inert gases is an interesting engineer’s challenge, as the design has ...

> more

News

Combining electronics and a turbo compressor in one device - the new CTi-17-700/1000.GB

Electrification in various industries, especially in mobile applications and vehicles, is more and more driven by ...

> more

Advantages of Celeroton oil-free helium compressors

With its 100% oil-free and gas-tight design, the Celeroton CT-NG-2000 compressor for Helium is the ideal solution for ...

> more